PTS850VM18SMTR LFS

PTS850 Series 5.4x5mm SMT Side Actuated Tact NEW Features/Benefits • 5.4 x 5.0 x 1.8 mm package • SMT termination • Side actuated with or Typical Applications • Headphone/ Headset • Health monitoring • Sports watch • Black box • Bluetooth accessory • Navigation without boss design • 180 & 350 gf versions • Lifecycles 50K B Environmental FUNCTION: momentary action CONTACT ARRANGEMENT: 1 make contact = SPST N.O. TERMINALS: SMT termination TRAVEL: 0.2 mm ± 0.1 mm LIFE: 50,000 cycles OPERATING TEMPERATURE: -40˚C to 85˚C STORAGE TEMPERATURE: -30˚C to 85˚C Electrical MAXIMUM VOLTAGE: 12 VDC MAXIMUM CURRENT DC: 50 mA CONTACT RESISTANCE: 500 mΩ INSULATION RESISTANCE: 100 MΩ min. Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC61760-1 Packaging 2,000 pieces per reel NOTE: • The PTS series is not certified for using in Automotive application and no PPAP. However, in the case of some automotive accessories and specific applications for 2 and 3 wheeled vehicles the PTS is widely used and very suitable. Please contact your local C&K representative to discuss your application and the best switch solution. How To Order Please see chart below for full part numbers. Type Actuation Force (gf) Stem Colour Remark PTS850VM18PSMTR LFS 180 + 80/- 40 Black With Boss PTS850VR18PSMTR LFS 350 ± 80 Natural With Boss PTS850VM18SMTR LFS 180 + 80/- 40 Black Without Boss PTS850VR18SMTR LFS 350 ± 80 Natural Without Boss Dimensions Dimensions are shown: mm are shown: mm Specifications Specifications and and dimensions dimensions subject subject to change to change 14 Nov 22 B–59 www.ckswitches.com www.ckswitches.com Tactile Switches Specifications PTS850 Series 5.4x5mm SMT Side Actuated Tact NEW WITHOUT BOSS P.C.B. LAYOUT 5.4 1 2 2 1 1.5 0.1 0.4 0.6 2 0.1 3.4 1 3 B 4 4.3 +0.2 -0 1.5 0.1 6.0 4.0 2.4 1.4 0.1 5.0 4.6 Tactile Switches SCHEMATIC 3 4 3 0.15 (4.35) 1.4 3.4 0.005 0.1 4 0.1 HATCHED AREA SHOWS SOLDERING LAND 1.5 0.1 1.8 (0.3) 0.1 P.C.B MOUNTING FACE 0.05 MAX. 0.05 MAX. TAPE & REEL REEL CARRIER TAPE 13.0 2.0 A +0.1 1.5 -0 B 21.0 0.8 12.0 B 0.5 0.2 4.0 0.05 5.5 0.35 2.0 0.5 1.75 12.0 A 2.6 SCETION A-A ( SCETION B-B DRAWING DIRECTION 330) +2 16.4 -0 22.4 MAX. Dimensions are shown: mm Specifications and dimensions subject to change 14 Nov 22 B–60 www.ckswitches.com PTS850 Series 5.4x5mm SMT Side Actuated Tact NEW WITH BOSS 5.4 PIERCING PLAN 3.4 1 0.1 0.1 1 2 3 1.5 0.1 2 1 3.0 2 0.4 0.6 4 B 4.3 +0.2 -0 4.0 6.0 1.4 2.4 4.6 +0.2 -0 HOLES 0.15 0.005 1.5 4 3 0.9 0.1 2- (4.35) 2.85 3 3.4 0.16 P.C.B MOUNTING FACE 0.1 4 0.1 HATCHED AREA SHOWS SOLDERING LAND 0.1 1.8 (0.3) 0.1 1.4 0.08 0.1 0.05 MAX. 0.5 3.0 1.5 0.1 0.8 0.05 MAX. TAPE & REEL REEL CARRIER TAPE 13.0 2.0 A B 21.0 0.8 12.0 B +0.1 1.5 -0 0.5 0.2 4.0 0.05 5.5 0.35 2.0 0.5 1.75 12.0 A 2.6 SCETION A-A ( SCETION B-B 330) +2 16.4 -0 DRAWING DIRECTION 22.4 MAX. Dimensions are shown: mm Specifications and dimensions subject to change 14 Nov 22 B–61 www.ckswitches.com Tactile Switches 5.0 0.1 SCHEMATIC